DSL-X11 User Manual
42
Step 5
Set
External Port Start
and
External Port End
.
Step 6
Select
Protocol
.
Step 7
Set
Internal Port Start
and
Internal Port End
.
Step 8
Enter
Remote IP
.
Step 9
Click
Save/Apply
to apply the settings.
If the application you require is not in the list, manually enter the information.
Select the protocol for the service you are providing from the
Protocol
drop-down list. Under
Public Port
, enter the port number of the service you are
providing. In the
Local Port
field, enter the internal port number to which service
requests are to be forwarded. In the
Local IP Address
field, enter the IP address
of the PC that provides the service.
Deleting Virtual Servers
Step 1
Select the
Remove
check box.
Step 2
Click
Remove
button to apply the settings.
3.4.3.3 Port Triggering
If you configure port triggering for a certain application, you need to determine a
trigger port and the protocol (TCP or UDP) that this port uses. You then assign
the public ports that are to be opened for the application to this trigger port. You
can select known Internet services or manually assign ports or port blocks.
Adding Port Triggering
Step 1
To set up port triggering for a service, choose
Advanced Settings
>
NAT
>
Port Triggering
, and click
Add
.
