34
DSL-N10S
Chapter 4: Configuring via the web GUI
Configure the firewall settings
The Firewall page allows you to configure the security settings for your wireless
network.
Configure the IP/Port filter settings
The IP/Port Filter page allows you to restrict certain types of outgoing or incoming
Internet data packets from or to your network.
To configure the IP/port filter settings:
Click
Internet Services > Firewall
tab
> IP/Port Filter
.
Select the
Rule Action
as
Permit
or
Deny.
In the
Protocol
dropdown list, select the protocol type.
In the
Direction
field, select
Upstream
(outgoing data packets) or
Downstream
(incoming data packets).
In the
Source IP Address
field, key in the IP address where the data packets
will be coming from.
In the
Destination IP Address
field, key in the IP addresses where the data
packages will be transferred to.
In the
Subnet Mask
fields, key in the subnet mask addresses for both the
source and destination IP addresses.
Key in the source and destination ports.
Tick
Enable
.
Click
Apply Changes
to apply the settings made. Click
Reset
to cancel the
filter settings. Click
Help
for more information on configuring the filter settings.
1.
.
3.
4.
5.
6.
7.
8.
9.
10.
Note:
If you want to restrict access to all outgoing or incoming Internet data packets, select
Permit
or
Deny
in the
Outgoing Action
or
Incoming Default Action
fields.