Asus DSBF-D, Manual

Page: 104 / 202

4 - 2 8 4 - 2 8
4 - 2 8 4 - 2 8
4 - 2 8 C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p
Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
The following items appear only if you enable the P o w e r O n B y R T C P o w e r O n B y R T C P o w e r O n B y R T C P o w e r O n B y R T C P o w e r O n B y R T C
A l a r m A l a r m A l a r m A l a r m A l a r m item.
RTC Alarm Date [0] RTC Alarm Date [0] RTC Alarm Date [0] RTC Alarm Date [0] RTC Alarm Date [0]
To set the date of alarm, highlight this item and press <Enter> to display a
date chart. Press <+> or <-> to change scroll through the options, then
press <Enter> when done. The default setting [0] is equivalent to everyday
alarm. Configuration options: [0] [1] ~ [31]
RTC Alarm Date [00 : 00 : 00] RTC Alarm Date [00 : 00 : 00] RTC Alarm Date [00 : 00 : 00] RTC Alarm Date [00 : 00 : 00] RTC Alarm Date [00 : 00 : 00]
To set the time of alarm:
1. Press <+> or <-> to set the desired value.
2. Use the left/right arrow key or press <Tab> to move to the next field.
3. Press <Enter> when done.
F1:Help
↑ ↑ ↑ ↑ ↑↓ ↓ ↓ ↓ ↓
: Select Item -/+: Change Value F9: Setup Defaults
ESC: Exit
→← →← →← →← →←
: Select Menu Enter: Select Sub-menu F10: Save and Exit
Item Specific Help
When the current
temperature equals this
limit, the fan will be
turned on IF it is not
already.
Hardware Monitor
CPU1 Domain 0 Temperature 39
o
C/102
o
F
CPU1 Domain 1 Temperature 29
o
C/84
o
F
CPU2 Domain 0 Temperature 0
o
C/32
o
F
CPU2 Domain 1 Temperature 0
o
C/32
o
F
SYSTEM1 Temperature 39
o
C/102
o
F
SYSTEM 2 Temperature 29
o
C/84
o
F
CPU_FAN1 Speed 2925 RPM
CPU_FAN2 Speed N/A
FRN_FAN1 Speed N/A
FRN_FAN2 Speed N/A
FRN_FAN3 Speed N/A
FRN_FAN4 Speed N/A
REAR_FAN1 Speed N/A
REAR_FAN2 Speed N/A
Smart Fan Control [Smart Fan II]
PhoenixBIOS Setup Utility
Advanced
4.4.8 4.4.8 4.4.8 4.4.8 4.4.8 Hardware Monitor Hardware Monitor Hardware Monitor Hardware Monitor Hardware Monitor
This menu shows the hardware monitor configuration settings. Select an
item then press <Enter> to display the configuration options.