Asus DS300 G2 Series Page 173 User Manual Download

Page: 173 / 262

DS300f G2 Series User Manual

167

learInG

tatIstICs

(Clu)

This function clears the statistical counts for the RAID controller, Fibre Channel ports, iSCSI ports, physical

drives, and logical drives. To clear statistics:

1. From the Main Menu, highlight

Additional Info and Management

and press

Enter

2. Highlight

Clear Statistics

and press

Enter

Press Y to confirm the deletion.

estorInG

aCtory

efaults

(Clu)

This function restores the factory default settings to the firmware and software items you select.

Caution

Restoring default settings can disrupt your ASUS DS300f G2 functions. Use this fea

ture only when necessary.
If you restore Management Network settings, you lose your network connection to

the ASUS DS300f G2.

Note

To reset the Administrator’s password to the factory default, see "Restoring Factory

Defaults (CLU)" on page 167.

1. From the Main Menu, highlight

Additional Info and Management

and press

Enter

2. Highlight

Restore Factory Defaults

and press

Enter

3. Highlight the setting groups you want to restore and press the spacebar to toggle between

Yes

and

Yes means this setting is restored to the default value.

No means the current setting remains untouched.

4. Highlight

Restore Factory Defaults

and press

Enter

Press Y to confirm the reset.

Summary of Contents for DS300 G2 Series







































































































































































































































































Search results

Summary of Contents for DS300 G2 Series

Reviews:

Related manuals for DS300 G2 Series

Brands by name

Popular brands

Asus DS300 G2 Series, User Manual

Search results

Summary of Contents for DS300 G2 Series

Reviews:

Related manuals for DS300 G2 Series

Brands by name

Popular brands