Setting lock direction
Enter master password (default:
0000) then press <OK>
Press <0> then press <OK>
NOTE: Set the lock direction after your ASUS DL101 is installed.
When the ASUS DL101 is unlocked, touch the panel, then press
<OK> to enter programming mode.
This setting must be set up
after installing the ASUS DL101 for the first time, and ensure the
thumbturn lever is installed correctly.
Unlocking the ASUS DL101
You can unlock the ASUS DL101 with a user password, one
time password (OTP), user card, key, or remotely through the
companion app.
When an incorrect password has been entered five times, the
alarm in the ASUS DL101 will go off, the touchscreen panel
will be locked for two (2) minutes, and a warning message
will be sent to all the family members connected to the ASUS
HG 100.
The DL101 comes with an anti-tamper mechanism, and the
alarm in the ASUS DL101 will go off for thirty (30) seconds
when an intrusion has been detected. Use an user password,
user card, or the companion app to disable the alarm.
NOTE: Refer to
Programming the ASUS DL101
section for more
details.
20
E12914_DL101_UM_V3.indd 20
5/24/2017 18:00:11
