Asus CUR-DLS User Manual Download | Manualshive

Page: 76 / 110

background image

76

ASUS CUR-DLS User’s Manual

5. Motherboard Driver Installation

5. Driver Installation

Windows 2000

2. For installation of the LSI_U3.SYS drivers, when the screen displays “Win-

dows 2000 Setup” press the F6 key to install the LSI_U3.SYS drivers. This
must be done or else these new drivers will not be recognized. If only the
SYMC8XX.SYS and/or SYM_HI.SYS drivers are needed no user action is
required as they will be loaded from the CD-ROM automatically.
Note: If F6 is not pressed, the user is still given the opportunity to load addi-
tional drivers later in the installation process. However, any driver loaded at
this later time is not recognized and no devices controlled by that driver are
available during Windows 2000 Setup.

3. When prompted for the manufacturer-supplied hardware support disk, insert

the appropriate LSI driver diskette containing the Windows 2000 driver re-
quired to support your LSI adapter(s) and press Enter. The LSI Driver diskette
is creating prior to installing Windows 2000.

4. The appropriate driver is shown highlighted. Press Enter to proceed.
5. Return to the Windows 2000 Setup screen. Press Enter to proceed. The mes-

sage about setup loading files appears. At this point, simply follow the Mi-
crosoft Windows 2000 installation procedure.

C. Existing System Installation

1. Boot Windows 2000 and log on as Administrator.
2. Right click on My Computer and click on Properties.
3. Click on the Hardware tab, and then click on the Device Manager button.
4. Click the “+” to the left of the SCSI and RAID controllers line. Find the adapter

desired for the driver upgrade and double click on the entry. Click on the Driver tab.

5. Information on the currently installed driver is displayed, and additional driver

details can be viewed by clicking the Driver Details….. button.

6. To update the existing driver, click the Update Driver button. The Upgrade

Device Driver Wizard begins. Click on the Next button.

7. Make sure Search for a suitable driver for my device is selected, then click on

the Next button.

8. Make sure the Floppy disk drives location is checked. Insert the appropriate LSI

driver diskette that contains the Windows 2000 driver required to support your
LSI adapter(s) and press Enter. The LSI driver diskette was created earlier.

9. The system scans the existing driver database and the floppy diskette drive for

drivers for the selected adapter.

10. A list of suitable drivers appears. The entry for the upgrade driver can be veri-

fied by scrolling the display to the right, and viewing the Location field. High-
light the driver for the upgrade installation disk and click on the Next button.

«
...
74
75
76
77
78
...
»

Summary of Contents for CUR-DLS















































































































Reviews:

No comments

Related manuals for CUR-DLS

Brand: Lantronix Pages: 10

Brand: Quectel Pages: 34

MachXO5-NX Development Kit

Brand: Lattice Semiconductor Pages: 64

Brand: Biostar Pages: 47

ITX-945GC3B N330

Brand: OEM Pages: 38

Altera Lark Board

Brand: Embest Pages: 9

Brand: MSI Pages: 76

Brand: JETWAY Pages: 47

Brand: R&S Pages: 44

GA-AX370M-Gaming 3

Brand: Gigabyte Pages: 40

Brand: Ideal-Standard Pages: 20

Brand: Yamaha Pages: 114

Brand: Ublox Pages: 42

tKINO-AL-E1-R10

Brand: IEI Technology Pages: 12

ISL71026MEVAL1Z

Brand: Intersil Pages: 21

H97M Anniversary

Brand: ASROCK Pages: 152

Brand: TRU Components Pages: 4

Brand: ComNav Technology Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands