manualshive.com logo in svg

Asus CUC2000-M, User Manual

Share
Download
Asus CUC2000-M User Manual Download Page 7

ASUS CUC2000-M User’s Manual

7

1.1 How This Manual Is Organized

This manual is divided into the following sections:

1. INTRODUCTION

Manual information and checklist

2. FEATURES

Production information and specifications

3. HARDWARE SETUP

Intructions on setting up the motherboard.

4. BIOS SETUP

Intructions on setting up the BIOS

5. SOFTWARE SETUP

Intructions on setting up the included software

6. SOFTWARE REFERENCE

Reference material for the included software

7. APPENDIX

Optional items and general reference

1.2 Item Checklist

Check that your package is complete. If you discover damaged or missing items,
contact your retailer.

1.  INTRODUCTION

1. INTRODUCTION

Manual / Checklist

Package Contents

(1) ASUS Motherboard

(1) 40-pin 80-conductor ribbon

cable for internal UltraDMA/
66 or UltraDMA/33 IDE
drives

(1) Ribbon cable for master and

slave IDE drives

(1) Ribbon cable for (1) 5.25” and

(2) 3.5” floppy disk drives

(1) ASUS 3-port USB connector set

with bracket (optional)

(1) Bag of spare jumpers

(1) Support drivers and utilities

(1) This Motherboard User’s

Manual

Optional Items

I/O Shield (for LAN model only)

ASUS consumer infrared set (op-
tional)

ASUS IrDA-compliant infrared
module (optional)

ASUS CIDB chassis intrusion de-
tection module (optional)

Modem riser (optional)

Summary of Contents for CUC2000-M





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands