Asus Crosshair V Formula-Z User Manual Download Page 138

Page: 138 / 190

4-6

Chapter 4: Software support

Chapter 4

Fast Tuning

: fast overclocking for the system

Extreme Tuning

: extreme overclocking for the system

Using Fast Tuning

Click

Auto Tuning

tab

Fast

Read the warning messages and click

Start

to start the auto-overclocking

process.

TurboV automatically overclocks the

CPU, saves the BIOS settings, and

restarts the system.

•
•

Auto Tuning

ASUS TurboV EVO provides you with these two auto-tuning modes for the most flexible auto-

tuning options.

•

The overclocking result varies with the CPU model and the system configuration.

•

We recommend that you set up a better thermal environment to prevent overheating

from damaging the motherboard.

After the system restarts, a message

appears indicating that auto-tuning is

successful. Click

to exit.

Summary of Contents for Crosshair V Formula-Z































































































































































































Search results

Summary of Contents for Crosshair V Formula-Z

Reviews:

Brands by name

Popular brands

Asus Crosshair V Formula-Z, User Manual

Search results

Summary of Contents for Crosshair V Formula-Z

Reviews:

Brands by name

Popular brands