Asus Crosshair II Formula User Manual Download Page 39

Page: 39 / 186

ASUS Crosshair II Formula

2-13

2.3.3

Installing the optional fans

Install the optional fan only if you are using a passive cooler or a water cooler.

Installing the optional fan with an active CPU cooler will interfere with the airflow

and destabilize the system.

1. Position the fan above the pipe

and heatsink assembly.

2. Fit the fan to the grooved edge of

the heatsink.

3. Carefully push down the fan until

it snugly fits the heatsink, then

connect the fan cable.

4. The photo shows the fan installed

on the motherboard.

• Plug the optional fan cable to the CHA_FAN1/2 connector on the

motherboard.

• Make sure the optional fan is installed correctly to prevent damage to the

fan and motherboard components.

Summary of Contents for Crosshair II Formula



























































































































































































Search results

Summary of Contents for Crosshair II Formula

Reviews:

Asus Crosshair II Formula, User Manual, Page: 39 / 186

Search results

Summary of Contents for Crosshair II Formula

Reviews: