C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s
C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s
C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s
C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s
C h a p t e r 3 : I n s t a l l a t i o n o p t i o n s
3 - 4
3 - 4
3 - 4
3 - 4
3 - 4
3.4
Rackmounting the server
To mount the server to the rack:
1.
Firmly hold the server on both sides and insert the rear panel side to
the front end of the rack rail, then carefully push the server all the
way to the back until the front panel fits the front end of the rack,
and the rack screws on the server match the middle hole on the rack..
2.
Tighten the two rack screws to secure
the server to the rack.
R a c k s c r e w
R a c k s c r e w
R a c k s c r e w
R a c k s c r e w
R a c k s c r e w
Summary of Contents for AP1600R
Page 10: ...x ...
