AAM6020VI ADSL Wireless Modem Router Quick Installation Guide
Page
4
1. Configuring Your Computers
1.1 Using Wired or Wireless Network Interface Card
Before you start to access AAM6020VI via Ethernet or Wireless, please configure your PC’s
TCP/IP address to be
192.168.1.x
, where x could be any number between 2 to 254, subnet mask is
255.255.255.0,
and Default gateway is
192.168.1.1
which is default IP address of ADSL modem.
Note
:
By default, the router of modem’s DHCP server is enabled, you can obtain an IP address
automatically once you’ve configured your PC to “obtain an IP address automatically”.
If you have configured PC’s to DHCP client, it is not necessary to input IP address manually. But
you must make sure without two DHCP servers existing in the same LAN before your PC receive
IP.
Windows® XP PCs:
1.
In the Windows task bar, click the
Start
button, and then click
Control Panel
.
2.
Double-click the
Network Connections
icon.
3.
In the LAN or High-Speed Internet window, right-click on icon corresponding to your network interface card
(NIC) and select
Properties
. (Often this icon is labeled
Local Area Connection
). The
Local Area Connection
dialog box displays with a list of currently installed network items.
4.
Ensure that the check box to the left of the item labeled
Internet Protocol (TCP/IP)
is checked, and click
.
