Asus AAEON UP Xtreme UP-WHL01, User Manual

Page: 91 / 104

CEC Client Installation 36
CEC C
lie
nt
Inst
allati
on
Supp
le
me
nt
al
Ap
pendix for
UP Xt
rem
e
OpCode Value Description Parameters Response Supported
<Record
On> 0x09 Attempt to
record the
specified source. [Record
Source] Enter ‘Recording’
state and start
recording if possible.
Send the initiator
<Record Status>.
Yes
<Record
Status> 0x0A Used by a
Recording
Device to inform
the initiator of
the message
<Record On>
about its status. [Record
Status Info] Yes
5.1.5 Timer Programming
Command Feature: This feature allows a device (e.g. TV) to set a timer recording on a
Recording Device. For example, it can be used to set timer blocks of a Recording
Device via a TV menu or via an EPG.
The following messages are used for the Timer Programming feature: <Clear
Analogue Timer>, <Clear Digital Timer>, <Clear External Timer>, <Set Analogue
Timer>, <Set Digital Timer>, <Set External Timer>, <Set Timer Program Title>, <Timer
Cleared Status>, <Timer Status>.
OpCode Value Description Parameters Response Supported
<Clear
Analogue
Timer> 0x33 Used to clear an
Analogue timer
block of a
device. See <Set
Analogue
Timer>
message. Clear timer block if
possible, then
respond with
<Timer Cleared
Status> Yes
<Clear
Digital
Timer> 0x99 Used to clear a
Digital timer
block of a
device. See <Set
Digital Timer>
message Clear timer block if
possible, then
respond with
<Timer Cleared
Status> message Yes
<Clear
External
Timer> 0xA1 Used to clear an
External timer
block of a
device See <Set
External
Timer>
message Clear timer block if
possible, then
respond with
<Timer Cleared
Status> message Yes
Table Continues on Next Page