Asus AAEON BOXER-8256AI User Manual Download Page 47

Page: 47 / 55

Chapter 2

–

Hardware Information

Fan

less
E

mb
ed

ded

ste

R-

2.5 Hardware Assembly

This section details the hardware assembly steps for the BOXER-8256AI. Please read

this section thoroughly before beginning installation and ensure you have all necessary

components ready. A Phillips head screwdriver is required.

2.5.1

Module Access & M.2 M-Key Installation

The Xavier NX module is located under the top heat sink. To access, remove the six

(6) screws securing the heatsink to the chassis, then lift the heatsink off. The module

will be located as shown.

The M.2 M-Key (2280) slot is also located under the top heat sink, adjacent to the

Xavier NX module. Follow standard procedures for expansion card installation, aligning

the notch on the M.2 2280 SSD with the M.2 key slot. Note the location of the

mounting screws.

Summary of Contents for AAEON BOXER-8256AI
























































Search results

Summary of Contents for AAEON BOXER-8256AI

Reviews:

Related manuals for AAEON BOXER-8256AI

Brands by name

Popular brands

Asus AAEON BOXER-8256AI, User Manual

Search results

Summary of Contents for AAEON BOXER-8256AI

Reviews:

Related manuals for AAEON BOXER-8256AI

Brands by name

Popular brands