Asus A7V600 User Manual Download Page 69

Page: 69 / 82

ASUS A7V600 Motherboard

3-3

3.2.2 Drivers menu

Some menu items appear only to specific operating system versions.

3.2.3 Utilities menu

The Utilities menu shows the applications and other software that the motherboard
supports.

ASUS PC Probe

Install utility that can monitor Fan, Speed, Voltage, and CPU temperature.

ASUS Update

Installs utility to download and update motherboard BIOS & drivers.

VIA 4 in 1 drivers

This item installs the following drivers:

- VIA Registry (INF) driver
- VIA AGP VxD driver
- VIA ATAPI vendor support driver
- VIA PCI IRQ Miniport driver.

AD1980 SoundMAX Audio Driver

This item installs the ADI 1980 AC’97 compliant audio controller and application.

3Com Gigabit LOM (3C940) Driver

This item installs the 3Com

3C940 LAN drivers for Gigabit LAN solution that

provides up to 1000Mbps data transfer rates.

USB 2.0 Driver

This item installs the USB 2.0 driver to upgrade your USB 1.1 ports to USB 2.0.

Summary of Contents for A7V600



















































































Search results

Summary of Contents for A7V600

Reviews:

Asus A7V600, User Manual, Page: 69 / 82

Search results

Summary of Contents for A7V600

Reviews: