manualshive.com logo in svg

Asus A7A266-E, User Manual, Page: 31 / 96

Share
Download
Asus A7A266-E User Manual Download Page 31

ASUS A7A266-E User’s Manual

31

3. HARDWARE SETUP

Connectors

3. H/W SETUP

6) Game/MIDI Connector (Gold 15-pin GAME_AUDIO) (optional)

You may connect game joysticks or game pads to this connector for playing
games. Connect MIDI devices for playing or editing professional audio.

Game/MIDI (15-pin Female)

7) Audio Port Connectors  (Three 1/8” GAME_AUDIO) (optional)

Line Out (lime) can be connected to headphones or preferably powered speakers.
Line In (light blue) allows tape players or other audio sources to be recorded by
your computer or played through the Line Out (lime).  Mic  (pink) allows
microphones to be connected for inputting voice.

Mic

Line In

Line Out

1/8" Stereo Audio Connectors

8) Floppy Disk Drive Connector (34-1 pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connecting
the single end to the board, connect the two plugs on the other end to the floppy
drives. (Pin 5 is removed to prevent inserting in the wrong orientation when
using ribbon cables with pin 5 plugged).

0

1

0

1

A7A266-E

NOTE: Orient the red markings on
the floppy ribbon cable to 

PIN 1

A7A266-E Floppy Disk Drive Connector

PIN 1

Summary of Contents for A7A266-E

































































































Reviews:

No comments