manualshive.com logo in svg

Asus A7A133, User Manual, Page: 12 / 96

Share
Download
Asus A7A133 User Manual Download Page 12

12

ASUS A7A133 User’s Manual

2.  FEATURES

2.  FEA

TURES

Motherboard Parts

Location

Processor Support

Socket A (462) for AMD Athlon/Duron CPUs ......................... 2
(NOTE: A CPU thermal sensor is integrated on the motherboard,
located near the center of the CPU heat source, just below the
CPU socket)
DIP Switches ............................................................................ 7

Chipsets

ALi M1647 system controller ................................................... 1
ALi  PCIset ............................................................ 15
2Mbit Programmable Flash EEPROM ................................... 10

Main Memory

3 SDR DIMM Sockets (maximum 3GB) ................................. 3
PC133 SDR memory support

Expansion Slots

5 PCI Slots .............................................................................. 19
1 Accelerated Graphics Port (AGP) Pro Slot ......................... 20
1 Audio Modem Riser (AMR) Slot ....................... (Shared)  17

System I/O

1 Floppy Disk Drive Connector ............................................. 13
2 IDE Connectors (UltraDMA/100 Support) ........................... 6
1 Parallel Port Connector ............................................ (Top)  24
1 Serial COM1 Port Connector ............................. (Bottom)  25
1 Serial COM2 Port Connector ............................. (Bottom)  23
USB Connectors (Port 0 & Port 1) ........................................  26
USB Header (Port 2,3 & Port 4,5) .......................................... 14
1 PS/2 Mouse Connector ............................................. (Top)  27
1 PS/2 Keyboard Connector .................................. (Bottom)  27
1 ASUS IrDA/iPanel Connector ..............................................  9
1 ASUS IR Connector ...........................................................  12
1 ASUS iPanel Audio Connector ............................................ 21

Audio

6-Channel Audio Chipset (optional) ...................................... 18
1 Game/MIDI Connector (on audio model only) ........ (Top)  22
1 Line Out Connector (on audio model only) ....... (Bottom)  22
1 Line In Connector (on audio model only) .......... (Bottom)  22
1 Microphone Connector (on audio model only) .. (Bottom)  22

Network Features

Wake-On-LAN Connector ...................................................... 16
Wake-On-Ring Connector ...................................................... 10

Hardware Monitoring

ASUS ASIC .............................................................................. 9
3 Fan Power and Speed Monitoring Connectors

Power

ATX Power Supply Connector ................................................. 5

Special Feature

Onboard LED ........................................................................... 4

Form Factor

ATX

2.2 Motherboard Components

See opposite page for locations.

Summary of Contents for A7A133

































































































Reviews:

No comments