Asus 90IG01N0-BM3000/10 User Manual Download Page 66

Page: 66 / 101

4.7.3 Firmware Upgrade

NOTE

: Download the latest firmware from the ASUS website at

http://www.asus.com

To upgrade the firmware:

1. From the navigation panel, go to

Advanced Settings

Administration

Firmware Upgrade

tab.

2. In the

New Firmware File

field, click

Browse

to locate the

downloaded file.

3. Click

Upload

NOTES

• When the upgrade process is complete, wait for some time for the

system to reboot.

• If the upgrade process fails, the wireless router automatically enters

rescue mode and the power LED indicator on the front panel starts

flashing slowly. To recover or restore the system, refer to section

5.2

Firmware Restoration

4.7.4 Restore/Save/Upload Setting

To restore/save/upload wireless router settings:

1. From the navigation panel, go to

Advanced Settings

Administration

Restore/Save/Upload Setting

tab.

2. Select the tasks that you want to do:

• To restore to the default factory settings, click

Restore

, and

click

in the confirmation message.

• To save the current system settings, click

Save

, navigate to

the folder where you intend to save the file and click

Save

• To restore from a saved system settings file, click

Browse

locate your file, then click

Upload

If issues occur, upload the latest firmware version and configure new

settings. Do not restore the router to its default settings.

Summary of Contents for 90IG01N0-BM3000/10






































































































Search results

Summary of Contents for 90IG01N0-BM3000/10

Reviews:

Related manuals for 90IG01N0-BM3000/10

Brands by name

Popular brands

Asus 90IG01N0-BM3000/10, User Manual

Search results

Summary of Contents for 90IG01N0-BM3000/10

Reviews:

Related manuals for 90IG01N0-BM3000/10

Brands by name

Popular brands