3-12
Chapter 3: Configuration
3.3.2 Launching the Web Configuration utility
Using the Wireless Setting Utility
Using an Internet browser
To launch the Web Configuration utility using an Internet web browser:
1. Open a web browser.
2. Disable your proxy settings, if any.
3. Type http://192.168.1.1 on the address bar of the browser, then press
<Enter>.
This option requires you to change the IP address of the LAN adapter
where the WL-330g is connected. Make sure the IP address of the
WL-330g and your computer is on the same subnet.
You can only launch the Web Configuration utility from the Wireless
Setting Utility when the device is in AP mode. Switch the device to AP
mode using the mode switch before launching the Wireless Setting Utility.
To launch the Web Configuration utility using the Wireless Setting Utility:
1. Click Start > All Programs > ASUS Utility > Wireless AP >
Wireless Setting.
2. Click Configure when the Wireless Setting Utility window appears.
3. Log on to the configuration window using the password (admin), then
click OK.
4. Disable your proxy settings, if any.
5. Click the Advanced tab, then
click the Web Configuration
Utility button.
6. A web browser appears. When
prompted, enter the default
password (admin), check the
Remember my password
option, then click OK. The Web
Configuration utility page
appears.
