Operation
1. Make sure the machine is set on secure place.
2. Make sure the reset button is depressed (warning light is off) and ground wire is connected.
3. Make sure the hoses are connected to the right place.
4. Make sure there is enough prime water in the machine.
5. Turn the switch on for continuous operation.
Note:
Do not lift inlet hose from water surface during the operation.
Do not remove the nozzle.
●On/Off Switch
Up (ON）
Down(OFF)
Sometime water come out from air vent while. It is not unusual.
●Adjusting flow of air intake.
It is adjusted at 45 degree when
we dispatch the factory. Please find
the best position while watching
bubbles generated.
Summary of Contents for ASG1
Page 2: ......