using heating bands with wires mounted around your
optics or cameras to prevent wires entanglements.
[LED on]
With the box lit (12), the status LED of the EyepieceWheel
(5) remains lit. Normally the LED is green, changing to red
when the Wheel turns. With the box off (12) you turn off
the LED so that it does not disturb during night
observations.
[Close Setup]
Close the ROTARION REMOTE CONTROL configuration
panel (11).
[Query]
When you press [QUERY] (13), the connection to the
ROTARION is started manually. Normally it is not necessary
to press it since when the program is started it is
connected automatically. But if you change the
communication port, the connection is stopped, and it will
necessary to start the connection manually, or to exit and
restart the program.
[Eyepiece Name Panel]
In this panel (17) you can give the name of the eyepiece
that you place in each port. These names will appear on
the home screen. Example: [PORT-1] = 1-TeleVue 40;
[PORT-2] = 2-Meade 28; etc. By means of the boxes (18) it
is possible to cancel a port by unchecking the box. Useful if
you do not mount an eyepiece.
[Focuser Panel]
In this panel (19) you can adjust everything related to the
ROTARION AUTOFOCUS accessory, which is explained in
detail in its own User Manual.
Summary of Contents for ROTARION EyepieceWheel
Page 1: ......
