T3-OPX installation
T3-OPX User Guide
29
5.
Success
Purge process initialized successfully. Place spittoon under the printhead, then power off
the printer unit by switching off the main PSU. Purge will automatically start on next power
on.
If the unit failed to move to the print height, check if the height control has been initialized
in the handling menu. The process will use the “purge height” in the settings menu.
Calibrate the printhead (optional)
The printhead calibration routines consist of 3 parts.
1.
Nozzle alignment -
See “Nozzle alignment” on page 30.
2.
See “Color density” on page 32.
3.
Nozzle health -
Summary of Contents for TrojanLabel T3-OPX
Page 1: ...U S E R G U I D E...
