T3-OPX installation
T3-OPX User Guide
32
9.
If successful, then apply the settings.
Color density
1.
Open the
Diagnostics
menu.
2.
Press
Print Density charts
.
3.
Repeat the steps below for each color (CMYK).
a.
Place the paper on the table.
b.
Press
Print density chart for C, M, Y or K color
.
c.
Scan the result.
4.
If successful, then apply the settings.
Nozzle health alignment
The nozzle health alignment determines the current state of the nozzles and will show
non-printing nozzles. Scanning the printed output will enable the printer to some extent cover
the missing nozzles. However, please note that there are no guarantees that it will eliminate
issues with missing nozzles.
1.
Open the
Diagnostics
menu.
2.
Press
Print Nozzle health plot
.
3.
Place the paper on the table.
4.
Press
Print Nozzle health plot - ODD
.
a.
Scan the result.
b.
If successful, then apply the settings.
5.
Place the paper on the table.
6.
Press
Print Nozzle health plot - EVEN
.
a.
Scan the result.
b.
If successful, then apply the settings.
Summary of Contents for TrojanLabel T3-OPX
Page 1: ...U S E R G U I D E...
