AstroNova QuickLabel QL800, User Manual

Page: 25 / 172

Getting Started
QL-800 User Guide 25
6 When prompted, select whether the QL-800 will be set as the default printer.
7 Choose Finish .
Related Topics:
- "Resolving Windows 7/8/10 USB Installation Issues" on page 138
Installing the Printer Driver (Network)
Use the following instructions to install the printer via a network connection.
For detailed information about the topic of networking, refer to documentation applicable to your
network environment and/or contact your network administrator.
1 Ensure the QL-800 is powered on and connected to the network via a LAN cable.
2 Power on your PC and insert the QL-800 Installer CD in the CD drive. The Installer CD
wizard will open. Choose
Install Driver .
If the autorun program does not start automatically, use Windows Explorer to launch the
“Setup.exe” file located on the CD.
Note: If you do not have a CD drive, you can obtain the software from
www.QuickLabel.com/downloads.
3 Choose Install Printer Software . The software installation wizard will start.
Note: If the Windows logo testing or publisher verification warning messages appear
during installation, choose to continue the installation.
4 When prompted to select a printer connection method, choose Configure to print over the
network . Then choose Next .
5 When prompted, view the list of printers discovered on your network.
• If your QL-800 printer is on the list, select it.
• If your QL-800 printer is not on the list, choose Other Printer . You can search for the
printer by entering its IP address. See “Changing Printer Networking Settings” on page
26. When the printer is found, select it.
With your QL-800 printer selected, choose Next .
6 When prompted, select whether the QL-800 will be set as the default printer.
7 Choose Finish .