ASTRO VG-881, Instruction Manual

Page: 13 / 41

Chapter 1 CONCERNING THE VG-881
1.4 Parts and their functions
1.4.1 VG-881 Front Panel
(D) (E)
PATTERN
CF CARD
9
5
10
6
1 2
7 8
3 4 720p
576i/PAL
USER 2
REMOTE
1080i
480p
XGA USER 1
480i/NTSC
1080p
TIMING
USB 2 USB 1
FRAME RATE
576i/SECAM
USER 3
576p DIGITAL VIDEO GENERATOR VG-881
ALL b YP P
TOP
G/Y R/P r r B/P b
HDCP
INV EDID AUDIO
CEC
MENU
NAME
POWER
(F)
(J) (A) (K) (Ⅰ) (H) (G)
(C) (B) (N) (M) (L)
(A) Cross key Select up, down, right, and left.
(B) ALL key Apply the program No. change to all interfaces.
RGB On/Off key RGB On/Off
YPbPr key Switch YPbPr and RGB. (C)
INV key White-black inverse the video level
HDCP key HDCP On/Off
CEC key Send CEC commands.
EDID key The EDID of the connected display is displayed on the screen.
(D)
AUDIO key
AUDIO On/Off （ MUTE ）
(E) MENU key Select the mode
(F) NAME key
Display the information of each display (port, timing, pattern etc)
* Font size and display content can be edited by the software.
(G) PATTERN select key Select patterns
(H) TIMING select key Select timings
( Ⅰ ) TOP key
Select the first program number of the group.
(While selecting MENU, L-Group, it goes back to the top of each item)
(J) Power button Power on/off
(K) VFD Panel 140×32 dot VFD panel
(L) CF Card Slot
Insert CF Card.
When taking out the CF card, use the EJECT button on the left of the slot.
(M)
Connector for
the remote box
* Remote box is not available now.
(N) USB terminal
USB terminal
（
A/B Type
）
(USB communication is under development)
Caution
Pay attention treating CF card.
Please see “1.6 CF card” about inserting / taking off the CF card.
3