Warranty conditions
Operating Manual U 960 -
Version 02-2022A
page 8
General information
Store or use the device in a safe location, well out of reach of small children. It may contain small
parts that can be swallowed or inhaled. Dispose of any small parts that are not needed.
Plastic bags may have been used for packaging the device. Keep these plastic bags away from
babies and children in order to avoid any danger of suffocation. Plastic bags are not toys.
Do not store the device near chemicals or in places in which any leakage of chemicals may occur.
Organic solvents or fluids in particular may cause the housing and/or cables to melt or disinte-
grate, presenting a danger of fire or electric shock. They may also cause device malfunctions.
Do not connect the mains adapter provided to any other products.
Warranty conditions
The general terms and conditions of ASTRO Strobel GmbH apply. You will find these in the current
catalogue or on the Internet under “www.astro-kom.de”.
Disposal
All of our packaging material (cardboard boxes, inserts, plastic film and bags) is completely recyclable.
This device must be disposed of as electronic waste at designated collection facilities in accordance
with the current disposal regulations valid in your district/state/country once the device is no longer in
use.
ASTRO Strobel is a member of the Elektro system solution for the disposal of packaging materials. Our
contract number is 80395.
Performance description
The U 960 is a passive combining network. The devices are used for extension of existing facilities by
connecting additional channels (e. g. a V 16 base unit).
Some types feature a test point for checking the output signal, attenuated by 20 dB.
Connecting the module
Observe all instructions about installation and mains connection described in the section “Important
safety information”!
Ensure that the mains voltage, signal sources etc. are properly connected to the device using the corre-
sponding connections. The local mains voltage must be the same as the supply voltage required to
operate the device (see section “Technical data”“).
Connect input and output jacks of the device via F-connectors of the coax cable.
HINWEIS
:
During operation of the U 960 all unused inputs of the device must be with a 75
Ohm terminating resistor.
