ASTRO D2-15, Manual

Page: 3 / 69

SAFETY PRECAUTIONS SAFETY PRECAUTIONS
GENERAL CONSIDERATIONS
1. Read and follow these instructions. Failure to do
this could result in severe personal injury or death.
2. Additional safety instructions and/or symbols are
located throughout this manual. They serve to warn
maintenance personnel and operators about
potentially hazardous situations.
3. Inspect the machine for unsafe conditions daily
and replace all worn or defective parts.
4. Keep work area uncluttered and well lit.
5. All covers and guards must be in place before
operating this equipment.
For precautions and de fi nitions of safety symbols,
refer to Safety Chapter of the service manual.
SERVICING EQUIPMENT
1. Only trained personnel are to operate and service
equipment.
2. Never service equipment while it is in motion.
3. Shut o ff the equipment and lock out all input
power and air supply at their sources before
attempting any maintenance.
4. Follow the maintenance and service instructions in
the manual.
SIGNS
1. Read and obey all of the warning labels, signs and
caution statements on the equipment.
2. Do not remove or deface any of the warning labels,
signs, and caution statements on the equipment.
3. Replace any warning labels, signs, and caution
statements which have been removed or defaced.
Replacements are available.
ADDITIONAL CONSIDERATIONS
1. To ensure proper operation of the equipment, use
speci fi ed electrical and/or air supply sources.
2. Do not attempt to alter the design of the
equipment unless written approval is received from
our factory.
3. Keep all manuals readily accessible at all times and
refer to it often for the best performance from your
equipment.