SECTION 2
ASSEMBLY
12
6.
Attach the Tab Box Tray.
The hooks on the Tab Box Tray fit over the
upper shaft, at the exit end of the Tabber, as
shown. The tray hangs off the exit end of the
Tabber.
7.
Proceed to
"External Feeder Control
Setup"
.
In-Line Roller Assembly Removal
To remove In-Line Roller Assembly, a small screwdriver can be
inserted under the spring wire, through the smaller hole in the
sidewall. Push up lightly on the spring wire to release the pointed
end of the shaft; allowing the pointed end of the shaft to be
pulled out of the sidewall.
The flat end of the shaft can be removed from the sidewall without
releasing the spring wire tension.
