manualshive.com logo in svg

ASTRO 4026187240868, Operating Manual

Share
Download
ASTRO 4026187240868 Operating Manual Download Page 3

Page 3

Before starting operation of the device

Operating Manual HDIQ 4 - 

Version 02-2022A

 Before starting operation of the device

HINWEIS

:  

Read this operating manual attentively! It contains important information about 

installation, ambient conditions and maintenance of the device. Keep this operating manual for 
future use and for handover in the event of a change of owner. 
The ASTRO company confirms that the information in this manual was correct at the time of 
printing, but it reserves the right to make changes, without prior notice, to the specifications, the 
operation of the device and the operating manual. 

Symbols and conventions used

Symbols used in these instructions

Pictograms are visual symbols with specific meanings. You will encounter the following pictograms in 
this installation and operating manual:

Warning about situations in which electrical voltage and non-observance of the instructions in this 
manual pose a risk of fatal injuries.

Warning about various dangers to health, the environment and material.

Warning about thermal dangers (risk of burns).

Recycling symbol: indicates components or packaging materials which can be recycled (cardboard, 
inserts, plastic film and bags). Used batteries must be disposed of at approved recycling points. 
Batteries must be completely discharged before being disposed of. 

This symbol indicates components which must not be disposed of with household rubbish.

Copyright information

Parts of the software used with this product originate from third-party vendors and were developed 
under a variety of licensing conditions. Detailed information on the licences can be found on the 
device's web user interface. If you select the menu item “Licensing” on the web browser interface of 
the device, you will find a link to a page with detailed information.
You can obtain the source code for licence-free parts of the software upon request and against 
payment of a processing fee. 
Please contact us at:
[email protected]
ASTRO Strobel Kommunikationssysteme
Olefant 3
D-51427 Bergisch Gladbach (Germany)
Tel.: (+49) 2204 405-0

All other parts of the software used with this product are subject to the copyright owned by ASTRO 
Strobel GmbH.

DRAFT VERSION

Summary of Contents for 4026187240868





























Reviews:

No comments

Brands by name

Popular brands

Load more brands