Printed in U.S.A. © 2016 Innovative Hearth Products
P/N 900665-00 REV. NC 04/2016
Page 2 of 2
Clear
anc
es
TAURUS™ ST SERIES
Pr
oduc
t Inf
ormation
Listing Inf
ormation
PFS
®
US
Report No. F09-130
These appliances comply with National
Safety Standards and are listed by PFS Cor-
poration to ANSI Z21.91 Ventless Firebox
Enclosures for Gas-Fired Unvented Decora-
tive Room Heaters and is approved for use
with appliances listed to ANSI Z21.11.2
decorative type unvented room heaters.
Cat. No.
Model
Description
Ship. Weight
Shipping Volume
F0382
TaurusSTZ2
Flush Faced
146 lb.s
26.7 Cu. Ft.
F0383
TaurusSTZ2
Louvered
146 lb.s
26.7 Cu. Ft.
42" Min.
0" to Wood
Floor
4" Min.
0" Min. Clearance to
Upper Frame/Wallboard
Ceiling
4" Min. from the Perpendicular
Side Wall to the Edge of Facial
1/2" Min. Clearance
to Combustibles
44-1/4”
22-3/4”
24"
INSTALLATION CLEARANCES
CAUTION: Use only the clearances specifi ed in Installation and Opera-
tion manual or on the fi rebox rating plate.
Minimum clearances to combustibles are:
Sides of outer casing
0” min.
Drywall to sides and top of front face
0” min.
Ceiling to opening
42” min.
Floor
CAUTION: Do not install the fi rebox directly on carpet or vinyl.
0” min.
Perpendicular walls, Right and Left
4” min.
Distance to Facing Walls
36” min.
Minimum Mantel Clearances
Supplied
Firebox
Hoods Must
Be Used
at All Ti mes
Wire-mesh
Screen
Firebox Top
Mantel Shelf
3"
6"
9-1/4”
Combustible
Material
Thickness
NOTE
: All vertical
measurements are from
top of fireplace hood to
bottom of mantel shelf.
These minimum
clearances replace any
other recommended
clearances supplied
with your ANS Z21.11.2
approved gas logs.
Top Frame
(Combustible
Material)
12" 15" 18"
Note: Do not
cover louver
openings .
6" Min.
1-1/2” Max.
Wall board or facing material (above firebox) may be of combustible
material, including decorative mantel ornaments or other similar
projections off of the facing material.
Top View
PROJECTED INSTALLATION
Projected installations can extend any distance into the room. A projection
may be ideal as a partition between two otherwise common areas when
added to an existing, fi nished wall.
