Operation
900684-00 03/2017
Innovative Hearth Products
Gemini™ Series Direct-Vent Gas Fireplaces
58
Installing the Gemini™ 40/45 Series Forest Oak Logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Forest Oak Log Set
Figure 53 - Locate the log placement tabs
Figure 54 - Place log #1
Log Number
Description
1
Rear Log
2
Right Bottom Log
3
Right Twig
4
Left Bottom Log
5
Left Twig Log
6
Middle twig log
1. If necessary, remove the glass door (Pages 60-61). Locate the placement tabs (Figure 53).
2. Bend up the log placement tabs (Figure 53). Place glowing embers (see Figure 45B, Page 55).
3. Place log #1 (Figure 54) on the corresponding placement tabs shown in Figure 53.
Catalog number for the entire set: See Page 75
for ordering information
4
1
2
3
6
5
Tab for
Log #1
Tab for
Log #1
Pin for
Log #2
Pin for
Log #4
Tab for
Log #4
Slots correspond
to log placement
tabs shown in
Figure 53
Bottom of log #1
Slot
Slot
4. Place log #2 (Figure 58) on the corresponding placement pins shown in Figures 53 and 54.
5. Place log #3 (Figure 59) on the corresponding placement pin shown in Figure 58. Log #3 straddles the grate bar
in the front as shown in Figure 59.
1
Pin for
Log #2
