© TALLERES DEL AGUA S.L. 2008. TODOS LOS DERECHOS RESERVADOS. DOCUMENTO CONFIDENCIAL Y EN PROPIEDAD.
Page 40 of 53
ENGLISH
10.
PACKAGING INSPECTION
This equipment is packaged using RECYCLABLE MATERIALS which can withstand even the
most difficult transportation conditions. Nevertheless, an inspection of the packaging should be
done in order to check for any damages and to avoid incorrect operation of the equipment.
TALLERES DEL AGUA will not be held responsible in this case.
¡WARNING!
IT IS VERY IMPORTANT TO KEEP THE PACKAGED EQUIPEMENT UPRIGHT AS THE
PACKAGING HAS BEEN DESIGNED FOR THIS. ALWAYS MAINTAIN IT IN A VERTICAL
POSITION.
IF THE UNIT IS DAMAGED, OR THE CONSIGMENT IS INCOMPLETE, MAKE A NOTE OF
IT ON THE CARRIER’S BILL OF LADING AND INMEDIATELY MAKE A CLAIM TO THE
COMPANY IN CHARGE OF SHIPPING.
The package includes the following elements:
AIR WATER cooler EF.
Owners Manual.
Warranty.
11.
OPERATING CONDITIONS
Water physical and chemical parameters must be in between:
PH
7,2 a 7,8
Residual Cl
1 a 2 ppm
Alkalinity
80-125 ppm
Solids
</=3000 mg/l
Ca
200-300 ppm
Normal ambient conditions for operation are:
Inlet outdoors air Temp.
27º C
Inlet water Temp.
24º C
Rh
60% Rh
Limits established for working conditions in order to guarantee the proper operation of the
equipment are:
Inlet condensation water maximumTemp.
35º C
Inlet condensation air maximumTemp.
40º C
Maximum inlet wáter pressure
3,5 bar
The operation conditions will affect the equipment performance.
12.
REQUIREMENTS AND PROCEDURES
Ensure that the place where this equipment will be placed is resistant enough to withstand
the total weight of the equipment.
