15
- The circle diameter should have
about 4 to 6 times the length of the
hull
- The circles should be as round as
possible
- The speed of the boat should be
around 2-3kn.
- The maneuver should be carried out
away from boat traffic, large ships and
harbor installations
- The weather conditions should
be calm (low wave height and wind
speed)
Please execute following steps:
1. Start turning the boat in a clock-
wise direction and then press the
push button on the Navsensor for
5 seconds (the color turns from
green to steady red)
2. Continue turning the boat untill the
red color of the button goes back to
grey (approx. after 1 1/5 circles)
3. Start turning the boat counter
clockwise and press the button again
for 2 seconds (the color turns back to
steady red) any issues please refer
to the LED code list below.
4. Continue turning the boat until the
steady red color changes.
Setting push button
with integrated
LED
Note: During this process there is no compass reading present!
5. At the end of the second circle the NavSensor analysis the data of both
circles. If the result doesn’t differ more than 2° the new compensation
values will be used and the compass is calibrated successfully. In this
case the color changes to green ( steady or flashing)
Summary of Contents for Navsensor NMEA 2000
Page 1: ...NMEA 2000 Navsensor User Manual ...
Page 2: ...2 ...
