Astra miniLIFT&move, User

Page: 9 / 28

4.2 Positioning of the elevator
· The handle is articulated to avoid tripping on the perimeter of the car. It is recommended to fold it and
secure it with the pin as shown in the “Figure 12”.
· Drive the lift by means of the handle and position it under the vehicle according to the desired part to be
lifted (“Figure 10”). See section 4.4 and 4.5 (Lift / lower maneuver).
· Follow the steps specified in the “Figure 11” for place the handle in horizontal position.
DANGER
Always use the lift in areas with no obstructions neither inclinations.
CAUTION
The elevator must remain perpendicular to the length of the car (“Figure 12”).
If the vehicle is new or it’s wet, you must clean the area where the pads work, in order to
prevent any possible slide.
figure 12
figure 10 figure 11
9 USER MANUAL · AE100L MINILIFT&MOVE