Status LEDs
The AT210 has internal status LEDs as below:
GPS status
GSM Network registration status
External power
During normal operation the LEDs should:
GPS
double flash once per second
GSM
single flash every 3 seconds
POWER
stays on constantly
Enclosure Sealing
When fitting the enclosure cover, please ensure
that both clips are snapped into place to
guarantee IP67 sealing. Note that the GPS
antenna faces the top of the enclosure (with
the slots). Ensure that the PCB is aligned with
the guide slots inside the enclosure and
carefully push in until the clips are fully
engaged.
Mounting
The AT210 can be secured to a
flat surface with double sided
foam adhesive tape, screwed in
place using the two mounting
lugs or secured with a single tie
wrap (up to 5mm
width).
