IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER.
CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
CAUTION:
Do not over tighten threaded studs, aluminum is a soft metal
and threads can easily be stripped.
1.
(SEE FIGURE 1)
Place table top (A) upside down on a flat, non-scratching surface.
2. Locate threaded holes under table top (A), and install threaded studs (eight places).
3. Install threaded studs (E) into table legs (B). Repeat with other three table legs (B).
4. Place table leg (B) upside down, and mount legs to table using mounting hardware,
flat washers (G), lock washers (H) and nuts (F).
5. Align support ring (C) and one table leg (B). Ensure ring tabs on support ring are facing
upward, join with mounting hardware flat washers (G), lock washers (H) and hex nuts (F).
Hand tighten only to hold it in place. Repeat with other three table legs.
6. Stand the table upright and securely tighten hardware in an “X” pattern.
7. Fix the adjustable feet (D) under table legs (B). Adjust feet until table stands level.
A
B
C
D
F
ASSEMBLY INSTRUCTIONS
Figure 1
E
PARTS AND HARDWARE LIST
G
H
Table Top
Leg
Support Ring
Threaded Stud, 8mm
Lock Washer, 8mm
Hex Nut, 8mm
Flat Washer, 8mm
1
4
1
16
Adjustable Foot
4
16
16
16
A
B
G
F
D
E
H
A
E
G
H
F
C
D
DESCRIPTION
PART #
QUANTITY
G
H
F
C
B
2
1
NOTE: This product is intended for residential, non-commercial use.
