PARTS LIST
PART #
DESCRIPTION
QUANTITY
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER.
CONTACT CUSTOMER SERVICE AT
1-888-424-3354
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
ASSEMBLY INSTRUCTIONS
A
Chair Base
1
B
Seat and Back Assembly
1
C
Hex Bolts, 6mm x 16
2
Figure 1
NOTE:
This product is intended for residential, non-commercial use.
A
B
C
1
2
1.
(SEE FIGURE 1)
Place chair base (A) upright on a flat surface.
2. Facing front of chair base, align steel rods of chair seat back assembly (B) with chair base.
3. Slide steel rods from chair seat back (B) into hollow steel tubes of chair base (A).
Slide the rods completely inside steel tubes.
4. Secure chair seat (B) to chair base (A) using bolt (C). Install bolt (C) into mounting hole
located on top of chair base steel tube. Tighten until secure. Do not over tighten.
C
B
A
Hollow
Steel Tube
Steel Rods
