ASSEMBLY INSTRUCTIONS
CAUTION:
Do not over tighten fasteners.
A
B
C
D
F
G
E
Figure 1
PARTS & HARDWARE LIST
PART #
DESCRIPTION
QUANTITY
A Table
Top
1
B Table
Legs
4
C
Leg Connector Bracket
1
D
Plastic Bolt Cap
8
E Lock
Washer
8
F Hex
Bolt
8
G Hex
Key
1
A
C
E
F
1. Place the table top (A) upside down on a flat non-scratch surface.
2. Insert table legs (B) into leg fittings of table top (A).
3. Place leg connector bracket (C) between table legs (B) and secure
with hex bolts (F), and lock washers (E). Finger tighten only.
Repeat this step for all four legs.
4. Carefully rotate table assembly to upright position. Tighten bolts (F)
with hex key (G).
5. Insert plastic bolt caps (D) over hex bolts (F).
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
Parts Detail
1
NOTE:
This product is intended for residential, non-commercial use.
2
D
G
B
