ASSEMBLY INSTRUCTIONS
CAUTION:
Do not over tighten fasteners.
1.
(SEE FIGURE 1)
Place the table top (A) upside down on a flat non-scratch surface.
2. Insert bumpers (F) into table legs (B). Position bumpers between table top
and table legs.
3.
Locate end cap leg fittings underneath the table top rim.
4. Inset table legs (B) into end cap leg fittings of table top (A).
5. Place leg connector rings (C) between table legs (B) and secure with flat head
screws (E). Finger tighten only.
6. Carefully rotate table assemble to upright position.
7. Tighten screws (E) with hex key (G) in a cross corner "X" fashion.
8. Install plastic umbrella ring (D).
PARTS & HARDWARE LIST
PART #
DESCRIPTION
QUANTITY
A
1
Table Top Tempered Glass
B
4
Table Legs
C
2
Leg Connector Ring
D
1
Plastic Umbrella Ring
E
8
Bumper, Clear Plastic
F
4
A
B
C
D
E
F
FIGURE 1
A
C
B
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER.
CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
Flat Head Socket Cap (Screw)
G
Hex Key
1
G
E
F
Step 4
