ASSEMBLY INSTRUCTIONS
2
3
A Base
Pedestal
1
B Large
Basin
1
C Center
Pedestal
1
D Small
Basin
1
E Electric
Pump
1
PARTS & HARDWARE LIST
PART #
PART #
DESCRIPTION
QUANTITY
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
D
C
Parts Detail
A
E
B
Figure 2
ASSEMBLY INSTRUCTIONS
1.
(SEE FIGURE 1)
Place the base pedestal (A) on
flat, level surface. Put the large basin (B) on the
base pedestal (A) aligning the tabs of the basin
with the notches in the top of the base pedestal
(A). Turn the large basin counter clockwise to
lock into place. Put the electric pump (E) into
the center ring in the bottom of large basin (B)
beside the PVC tube. Place the power cord of
the pump (E) through the PVC tube in the
pedestal base (A) and out the bottom of the base
as shown.
B
D
Figure 1
Power Cord
Power Cord
3.
(SEE FIGURE 3)
Connect the tube of the small
basin (D) to the spout on the electric pump (E).
4. Place the center pedestal and small basin
assembly (C,D) in the center of large basin (B)
making sure the electric pump (E) is inside the
center
pedestal.
2.
(SEE FIGURE 2)
Feed the tube on the small
basin (D) through the center pedestal (C), then
connect the small basin (D) to the center
pedestal (C) by aligning the tabs of the small
basin with the notches in the top of the center
pedestal. Secure the small basin (D) by turning
counter clockwise onto the center pedestal (C).
3.
Basin Tab
Basin Notch
Power Cord
Figure 3
A
E
C
Tubing
C
D
Tubing
E
B
