Remarks: The output of using power adapter is twice as great as the output of using battery.
When docked, your iPod will also recharge when using the AC adapter.
START PLAYING
1.
Slide power switch
to the right for “AUTO ON” and note that the power indicator will illuminate.
2.
Select and play your favorite music using your iPod.
VOLUME CONTROL
The
buttons on the front panel are the master volume controls for the i-P22 system. Press and hold “+”
to increase the volume and then “-” to decrease the volume. The volume will start at 40% maximum volume
position every time you re-start your i-P22 system. This will avoid disturbing others when booting it up.
POWER OFF
To minimize power consumption, slide power switch to OFF
when you are no longer using the device
If your i-P22 is not to be used for an extended period of time, remove the AA batteries from i-P22. Please note that
the i-P22 has an “AUTO SHUT-DOWN” (STANDBY) function which prevents excess power consumption during idle
play.
AUTO SHUT-DOWN (STANDBY)
When the power switch is set at the “AUTO ON” position, the i-P22 system will shut down automatically and goes
into standby mode if an audio signal is not detected within 5 minutes. The LED on the power switch will then turn
to green and blink. The LED will automatically stop blinking
when an audio signal is detected and the
i-P22 system will automatically power on. Power consumption will be reduced in this “standby” mode, but we
suggest that you set the power switch to the “OFF” to shut down the i-P22 system completely when not in use for
an extended period of time to save battery life.
7
Summary of Contents for i-P22
Page 1: ......
Page 14: ...www astone com au...
