ASTON HARALD M32 CATAMARAN, Assembly Manual

Page: 26 / 78

26
The diamond turnbuckle needs to be properly greased to function.
It’s a good opportunity to clean and service the turnbuckle when the
mast is disassembled. Unscrew and remove the bolt entirely, do not
remove the hanger from the mast. Clean the bolt, bronze nut and
washer. Put grease on the entire thread of the bolt and bronze nut
and on the washer.
11
Make sure that the nut is all the way down in the
hanger as shown in the picture, this must be
controlled while tensioning the bolt to ensure that
it is not on the side.
IMPORTANT!