22
1. Your satellite receiver
1.1 Your receiver’s front panel (see page: 51)
1
VFD display:
will show channel’s name when selected and all menu options. When the receiver is OFF,
display will show the clock.
2
V.F.D
3
Channel:
To increase or decrease channel’s number
4
Power:
This button allows you to put your receiver ON or in Standby mode
5
Push:
Smart card readers and Common interface compartiment
1.2 Your receiver’s rear panel
1
IF input (950-2150MHz) and Loop through
2
L&R audio outputs:
to connect your receiver to any HiFi equipment
3
Video output:
To connect your receiver to your TV set or VCR
4
VCR scart:
To connect your receiver to your VCR
5
TV scart:
To connect your receiver to your TV set.
6
Serial port:
reserved to service applications.
7
Power:
To switch your receiver ON or OFF
1.3 Your remote control (see page: 51)
1
Standby:
press here to switch ON or switch back to Stand-by mode
2
Numerical keys:
type a number to directly access a channel or to enter alphanumerical data into
specific menus.
3
OK/Menu:
To access to the main menu or to confirm a choice in a menu.
4
Volume/left, right Navigation keys:
Allows you to control the volume up or down during video and to
move the cursor left or right within the menus.
5
CH+/Page up:
To access to the next channel in the main channel list, to go to the next page of a list
and to change data on menu mode.
6
FAV:
To call the last used favorite list, to move into the favorite list window during favorite list creation
menu.
7
P.Guide:
To access to present and following program guide.
8
Zoom:
allows you to zoom on the picture during “reorganization menu”, allows you to choose and zoom
on a part of the picture during video mode(confirm by O.K). You can move the magnifier using the
navigation keys.
9
Radio:
Press to access directly the radio list.
10
West (blue):
When connected to a motorized antenna press to move the dish to the west.
11
Delete/A.Focus key:
Allows you to delete a bouquet or a channel when in Bouquet and Channel
reorganization menu or to optimally position the antenna using autofocus function if connected to a
motorized system.
12
LANG(green)/LocSat:
Allows you to select a language when the program offers multi-languages option
or to modify a satellite positioning parameters in the installation menu, for fixed or motorized installation.
13
ADD/EAST:
allows you to manually add a bouquet or a channel when in Channel updating or
reorganization menus and to move the dish East when using motorized installation.
14
Mute:
Press to turn off the sound, press again to turn on.
15
AUDIO:
Press to access the audio equalizer menu.
16
LIST:
Press to access to the main list of bouquets and channels
