background image

  10. WARNING:

 To avoid the risk of accidental injury or drowning children should

        not use the hydro massage bathtub without adult supervision.

  11. WARNING:

 To avoid injury, take care when entering or exiting the

        hydro-massage bathtub.

  12. WARNING:

 To avoid unconsciousness and possible drowning, do not take

        drugs or drink alcohol before or during the use of a hydro massage bathtub
        equipped with a heater.

  13. WARNING:

 To prevent risk of fetal injury, a pregnant or possibly pregnant

        woman should consult a doctor before using a hydro massage bathtub
        equipped with a heater.

  14. WARNING:

 To reduce the risk of hyperthermia and possible drowning, do

        not use a hydro massage bathtub equipped with a heater immediately
        following strenuous exercise.

  15. WARNING:

 To reduce the risk of electric shock, do not permit electric

        appliances (such as a hair dryer, lamp, telephone, radio, or television) within
        1.5m (5 ft.) of a hydro massage bathtub.

  16. CAUTION:

 Test the ground fault circuit interrupter (GFCI) protecting this

        appliance periodically in accordance with the manufacturer's instructions.

  17. WARNING:

 Water temperature in excess of 40 C (104 F) may be injurious to

        your health and increase the risk of hyperthermia and drowning.

  18. WARNING:

 To reduce the risk of hyperthermia, people using medication and

        or having an adverse medical history should consult a doctor before using a
        hydro massage bathtub equipped with a heater.

3

 

Summary of Contents for MT601-R


















Reviews: