NOTE: If your surface is prone to cracking or chipping then it is
recommended that you pilot drill first using a smaller drill bit, and then step
up to the final size.
2. Using the appropriate drill bit for your wall surface drill the hole locations with a
5/16" diameter drill bit. Install the plastic anchors provided into the drilled holes.
Repeat for the other side.
3. Remove the wall mounts (6) from the rail ends (5). Using the hardware from
Screw Pack 1, install the wall mounts (6) on the wall. Repeat the installation
on the other side.
4. Reinstall the rail ends (5) onto both ends top rail (2), so the the top rail (2) end
is exposed.
ATTENTION:
A minimum of two people are required for the next assembly steps.
5. Position the top rail / fixed glass assembly into place in your shower opening.
Slide the rail end (5) over the wall mount (6) and secure using the set screw.
Repeat on other side.
6. Install the glass clamp (7) to fixed glass (3) using hardware provided. See
figure 6 for details. Flat smooth surface of glass clamp (7) should be installed
on outside of fixed glass (3).
7. Insure plastic sliding door glide is in place in underside of sliding door track
divider (8) and positioned to proper location for 10mm glass thickness. See
figure 7.
8. Position the sliding door track divider (8) into position as seen in figure 8 and
mark the 2 shower tray hole positions.
Note: In drawing 8 the hole locations
for attaching sliding door track divider should be 1
ls"
from edge of
fixed glass. See details in figure 8.
NOTE: If your surface is prone to cracking or chipping then it is
recommended that you pilot drill first using a smaller drill bit, and then step
up to the final size.
9. Using the appropriate drill bit for your tray surface drill hole locations with 1/8"
diameter drill bit. Position the sliding door track divider (8) over drilled holes,
and secure sliding door track divider (8) to tray using hardware in screw pack 2.
See figure 9.
1 2
Summary of Contents for Moselle SDR976
Page 1: ...MOSELLE SDR976...
Page 18: ...Installing the door seals Install the door seals according to the drawing 17...
Page 25: ...Notes 24...
Page 26: ...Notes 25...
