www.astontechusa.com
2
Aston Tire Changer ATC-8823 User’s Manual
Warning!
FAILURE TO OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH. PLEASE READ
THIS ENTIRE MANUAL PRIOR TO INSTALLATION AND OPERATION. BY USING THIS PRODUCT, YOU
AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS MANUAL.
MAKE SURE ALL OPERATORS READ AND UNDERSTAND. KEEP YOUR INVOICE WITH THIS MANUAL FOR
FUTURE REFERENCE. MANUFACTURER SHALL NOT BE LIABLE FOR ANY INJURY TO PERSONS ON
DAMAGE TO THINGS CAUSED BY FAILURE TO COMPLY WITH THESE REGULATIONS AND CAN CANCEL
WARRANTY COVERAGE.
Failure to follow danger, warning, and caution instructions may lead to serious personal injury or death to
operator or bystander or damage to property. Do not operate this machine until you read and understand all
the dangers, warnings and cautions in this manual.
OWNER’S RESPONSIBILITY
To maintain machine and user safety, the responsibility of the owner is to read and follow these instructions:
•
Follow all installation instructions.
•
Make sure installation conforms to all applicable Local, State, and Federal Codes, Rules, and
Regulations; such as State and Federal OSHA Regulations and Electrical Codes.
•
Carefully check the unit for correct initial function.
•
Read and follow the safety instructions. Keep them readily available for machine operators.
•
Make certain all operators are properly trained, know how to safely and correctly operate the unit,
and are properly supervised.
•
Allow unit operation only with all parts in place and operating safely.
•
Carefully inspect the unit on a regular basis and perform all maintenance as required.
•
Service and maintain the unit only with authorized or approved replacement parts.
•
Keep all instructions permanently with the unit and all decals on the unit clean and visible.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING UNIT
•
Read and understand all safety warning procedures before operating the machine.
•
Before performing any services or maintenance, always disconnect the machine from its air supply
source. Pump the bead breaker pedal several times to evacuate all compressed air from the machine
and disconnect the unit from its electrical supply source.
•
Keep hands and feet clear. Remove hands and feet from any moving parts.
•
Keep work area clean and dry. Cluttered, damp or wet work areas invite injuries.
•
Keep children away from work area. Do not allow children to handle this machine.
•
Consider work area environment. Do not expose equipment to rain. DO NOT use in damp or wet
locations. Keep area well lighted.
•
Only trained operators should operate this equipment. All non-trained personnel should be kept
away from work area. Never let non-trained personnel come in contact with or operate machine.
