Aston
®
Tire Changer ATC-5800 User’s Manual
|
26
www.astontechusa.com
◇
Place tire over wheel and move Vertical Arm and Mount/ Demount Head into position
as described earlier.
◇
Manually push the tire down into the drop center of the wheel directly across from the
Mount/ Demount Head to reduce the tension force on the bead. Depress the Table Top
Pedal and rotate the wheel to begin mounting the lower bead. Rotate the Table Top until
the lower bead is fully mounted.
NEVER MOUNT A DAMAGED TIRE. NEVER MOUNT A TIRE ON A RUSTY OR
DAMAGED WHEEL. DAMAGED TIRES AND/OR WHEELS MAY EXPLODE.
IF YOU DAMAGE THE TIRE BEAD DURING MOUNTING, STOP! REMOVE THE TIRE
AND MARK IT AS DAMAGED. DO NOT MOUNT A DAMAGED TIRE.
NOTE:
THE FOLLOWING PROCEDURES SHOW THE ASSIST TOWER BEING USED; THE
TIRE CHANGER YOU ARE USING MAY NOT HAVE THE ASSIST TOWER
INSTALLED
.
NOTE:
LOW PROFILE TIRES MAY REQUIRE USE OF THE BEAD LIFTING TOOL
.