24
YL-IDH4001P
730
430
62
58
695
410
50 mini
YL-CDH4019S
730
430
52
48
695
410
50 mini
YL-ICDH4201SP
730
430
62
58
695
410
50 mini
Under any circumstances, make sure the Induction cooker hob is well ventilated and the air
inlet and outlet are not blocked. Ensure the Induction cooker hob is in good work state. As
shown below
Note: The safety distance between the hotplate and the cupboard above the
hotplate should be at least
760
mm.
A(mm) B(mm)
C(mm)
D
E
760
50 mini 20 mini Air intake Air exit 5mm
Before you install the hob, make sure that
• the work surface is square and level, and no structural members interfere with space
requirements
• the work surface is made of a heat-resistant material
• if the hob is installed above an oven, the oven has a built-in cooling fan
• the installation will comply with all clearance requirements and applicable standards and
regulations
• a suitable isolating switch providing full disconnection from the mains power supply is
incorporated in the permanent wiring, mounted and positioned to comply with the local
wiring rules and regulations.
The isolating switch must be of an approved type and provide a 3 mm air gap contact
separation in all poles (or in all active [phase] conductors if the local wiring rules allow for
Summary of Contents for CDH4019S
Page 29: ...29 ...