12
If the display flashes alternately with the heat
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is
placed on it.
When you have finished cooking
1. Touching the heating zone selection
control that you wish to switch off
,
2. Turn the cooking zone off by scrolling down to”0” or touching”-“ and”+”
control together. Make sure the display shows”0”
3. Turn the whole cooktop off by touching the ON/OFF control.
