Astera LED Technology GmbH
Technical Reference
Manual for AX10 SpotMax™
2020-08-26
Page | 13
7.8
M
AIN
M
ENU
O
PTIONS
The main menu can be entered from the status screen by pressing MENU or +. To cycle
between the main menu entries, press the + or
–
keys. Pressing MENU again will go back to
the status screen.
Used to change the input source or set it to AUTO.
Entering this menu resets all STANDALONE settings to default
and makes the light display a static color.
Set the DMX address.
Set the DMX parameters.
Unpair from a CRMX or W-DMX
™
transmitter.
Set the light
’
s runtime on battery in hours.
Set parameters of the standalone engine.
The light can react to the loss of AC power input.
Information about the light: radio pin, firmware version, battery
status, etc.
Reset all user settings to default. Should be done after each
usage to ensure consistent behavior. The RADIO PIN is NOT
reset.
7.9
M
ENU
S
HORTCUTS
To get to the DMX address setting, press the ENTER key twice from the status screen.
To open the DMX settings menu, press ENTER, then the + key and ENTER again.
To reset the light to default settings, press the
–
key, then ENTER and again ENTER.
Main menu:
INPUT SELECT
Main menu:
STATIC COLOR
Main menu:
DMX ADDRESS
Main menu:
DMX SETTINGS
Main menu:
UNPAIR CRMX
Main menu:
RUNTIME
Main menu:
STANDALONE
Main menu:
AC FAILURE
Main menu:
INFO
Main menu:
RESET SETTINGS
Summary of Contents for SpotMax AX10
Page 1: ...AX10 SPOTMAX User Manual...
