0 7
Remark
Cleaning the Device
To ensure the best performance from this device, you must keep discs and equipment clean.
- Disconnect the power cord before cleaning.
- Wipe the stain with a soft cloth. If there are a lot of stains on the device, wipe clean with a dry cloth, after
wiping with a damp cloth in water.
- The performance of the device can be degraded, damaged, or the paint may peel off, therefore please note
the following:
Do not wipe with a hard cloth. / Do not wipe too hard. / Do not wipe with thinner or benzene. /
Do not leave for a long time in contact with rubber or plastic/ Do not spray volatile material such as insecticide.
Disc Handling
- Do not touch or scratch the recorded reflective surface.
- Do not apply foreign substances or write on the label. Do not bend the disc.
- When you clean the disc, use a soft cloth in a straight line from the center
towards the edge.
Do not use thinner, benzene, record cleaner or antistatic sprays.
Before Use
